| Last Modified: 11-29-2007 | 1.6 A | |
| Service Category: Engine/Hybrid System | Section: Engine Control | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM000002I58004X |
| Title: 2UZ-FE ENGINE CONTROL: IGNITION COIL AND SPARK PLUG: INSTALLATION (2008 Sequoia) | ||
INSTALLATION
1. INSTALL SPARK PLUG
(a) Using a 16 mm plug wrench, install the 8 spark plugs.
Torque: 18 N·m (178 kgf·cm, 13 ft·lbf)
2. INSTALL IGNITION COIL ASSEMBLY
|
(a) Install the 8 ignition coil assemblies with the 8 bolts. Torque: 7.5 N·m (76 kgf·cm, 66 in·lbf) |
(b) Connect the 8 ignition coil assembly connectors.
3. INSTALL AIR SWITCHING VALVE ASSEMBLY (for Bank 2)
4. INSTALL NO. 2 AIR TUBE
5. CONNECT NO. 2 AIR INJECTION SYSTEM HOSE
6. CONNECT NO. 1 WATER BY-PASS PIPE
7. INSTALL FRONT FENDER APRON SEAL RH
8. INSTALL AIR SWITCHING VALVE ASSEMBLY (for Bank 1)
9. INSTALL NO. 3 AIR TUBE
10. INSTALL NO. 2 AIR HOSE
11. INSTALL FRONT FENDER APRON SEAL LH
12. INSTALL AIR CLEANER HOSE ASSEMBLY
13. INSTALL THROTTLE BODY COVER ASSEMBLY
|
|